Lone Star Salute Dual-Action OTF Blade - Texas Flag
5 sold in last 24 hours
Sun on your back, grit in the air, and a Texas flag riding in your pocket. The Lone Star Salute Dual-Action OTF Blade snaps out the front with a decisive thumb slide, throwing a black partially serrated dagger into play. A solid zinc-alloy handle, glass-breaker pommel, and nylon sheath keep it ready for work, while the raised Lone Star, longhorn, and bold “DON’T MESS TEXAS” graphic make every deploy a small Texas salute. Built for carry, display, or both.
Texas Pride, Out the Front
Thumb hits the slide, spring snaps, and that black partially serrated dagger blade punches straight out the front. The Texas flag is already in your hand — white star, bold red and blue, longhorn graphic, and a clear message: you’re carrying the Lone Star with you. The Lone Star Salute Dual-Action OTF Blade - Texas Flag is built for people who want their everyday carry to say exactly where they’re from and how they show up.
Why This Dual-Action OTF Stands Out
This isn’t a wall-hanger pretending to be tough. It’s a dual-action out-the-front automatic with a 3.5-inch dagger blade, partial serrations, and a matte black finish that’s ready for real work. The stainless steel blade rides in a zinc-alloy handle wrapped in full Texas flag artwork, backed by a glass-breaker pommel and pocket clip so it carries like a serious tool, not just a souvenir.
Built to Be Worked, Not Babied
The moment you slide the thumb switch, you feel the internal spring stack take up tension, then drive the blade cleanly out the front. Retracting is the same confident motion in reverse — dual-action OTF for fast, repeatable deployment and retraction. At 8.75 inches overall and 6.16 ounces, this piece has enough heft to feel planted in the hand without turning into dead weight on your belt or in your pocket.
Stainless Steel Dagger Blade with Serrations
The 3.5-inch stainless steel dagger blade gives you piercing capability from either edge, with a partially serrated section for ripping through rope, webbing, or packing material. The matte black finish cuts glare and keeps the Texas flag handle visually in the spotlight, while still reading immediately as a tactical, ready-to-use blade.
Zinc-Alloy Handle with Texas Flag Graphics
The full-length zinc-alloy handle is finished in a Texas flag motif — blue field and white star near the thumb slide, red and white bands running the length, and a longhorn head over the slogan-inspired “DON’T MESS TEXAS” text at the base. Multiple exposed handle screws reinforce the rugged, hardware-forward look and lock the chassis together for repeated OTF cycling.
Carry, Deployment, and Real-World Use
This dual-action OTF is sized for genuine EDC: 5.25 inches closed, riding in the pocket on a tensioned clip or on your belt in the included nylon sheath. The rectangular profile with slight contouring fills the palm, making the thumb slide easy to index even when you’re not looking at it. Whether you’re opening boxes, cutting cord, or just wanting that instant-ready feel, the action becomes second nature quickly.
Thumb Slide and Glass-Breaker Pommel
The side-mounted thumb slide is deliberately ridged, giving you grip even if your hands are sweaty or gloved. At the bottom of the handle, the glass-breaker style pommel adds both emergency utility and a finishing touch that fits the overall Texas-tough attitude of the design.
Pocket Clip and Nylon Sheath Options
You get two carry paths out of the box. Use the pocket clip for low-profile, everyday carry, where the Texas flag handle will flash just enough to start conversations. Or run it on your belt or bag with the nylon sheath when you’re out on the ranch, at the range, or working around the property.
Texas Collector Piece, Everyday Workhorse
For collectors, this is a state-pride OTF that actually earns its place on the shelf. The Texas flag theme isn’t a sticker — it’s integrated into the whole handle, backed by real hardware, a functional blade, and a dual-action mechanism. For users, the combination of partially serrated dagger blade, solid handle, and quick deployment makes it a capable cutting tool with a lot more personality than a plain black automatic.
Whether you’re born-and-raised Texas, a proud transplant, or just drawn to the Lone Star attitude, this OTF knife carries exactly that energy. Thumb slide, snap, black steel out the front — every deploy is a small Texas salute.
What OTF Buyers Want to Know
Is this knife spring-assisted or fully automatic?
This is a dual-action out-the-front automatic. The internal spring system both deploys and retracts the blade when you run the thumb slide forward or back. There’s no manual folding — the blade travels straight out and straight back into the handle.
What is the primary use for this OTF?
It’s built as a tactical-leaning everyday carry and collector piece. The partially serrated dagger blade handles light to medium cutting tasks, emergency rope or strap cutting, and general utility. At the same time, the Texas flag graphics, longhorn, and bold slogan give it strong display value for anyone who collects state or patriotic-themed blades.
Is an out-the-front like this legal to carry?
Automatic and out-the-front knife laws vary heavily by state, and often by city or county. Some states allow OTF and other automatics for most adults; others restrict them to law enforcement or limit blade length; a few largely prohibit them. Before you carry this dual-action OTF, check your current state and local laws on automatic and out-the-front knives, including any transport or concealment rules. Laws change, so rely on up-to-date official sources, not just hearsay.
Who is this OTF best suited for?
This piece fits anyone who wants a Texas-themed automatic that actually works hard. Ranch and farm users who appreciate a quick-deploy blade, EDC carriers who like a little attitude in their pocket, and collectors building a Texas, state, or patriotic section in their display all get what they’re looking for here.
How does it hold up to regular use?
The stainless steel blade, zinc-alloy handle, and screw-fastened chassis are designed for repeated deploy/retract cycles and everyday cutting. Like any OTF, it performs best if you keep the blade channel reasonably clean and avoid forcing deployment into obstructions. Treat it as a serious tool with a strong Texas identity, and it will return the favor over the long haul.
Texas in Your Pocket, Every Day
There are plenty of generic black automatics out there. This one makes a statement every time you draw it. The Lone Star Salute Dual-Action OTF Blade - Texas Flag is for the person who wants their gear to say something about who they are — proud of their state, comfortable with a fast-deploying blade, and not interested in subtle when it comes to identity.
Clip it, sheath it, or drop it in your pocket. When the moment comes, thumb hits the slide and that Texas flag moves with purpose. Field-ready, display-worthy, unapologetically Lone Star.
| Blade Length (inches) | 3.5 |
| Overall Length (inches) | 8.75 |
| Closed Length (inches) | 5.25 |
| Weight (oz.) | 6.16 |
| Blade Color | Black |
| Blade Finish | Matte |
| Blade Style | Dagger |
| Blade Edge | Partial-Serrated |
| Blade Material | Stainless Steel |
| Handle Finish | Matte |
| Handle Material | Zinc Alloy |
| Button Type | Thumb Slide |
| Theme | Texas Flag |
| Double/Single Action | Dual Action |
| Pocket Clip | Yes |
| Sheath/Holster | Nylon Sheath |